Tag Archives: bike

Today’s Riding Lesson: Commit to the Cattle Grid

20130720-120823.jpg

This morning I set out for ride through the New Forest which straddles the Hampshire and Dorset county line. I left Bournemouth just before 6AM and headed up towards Cranborne for some lovely climbs past Gaunts Common, Holt and our old cottage near Horton. After an brilliant descent into Cranborne, I spent the next 25KM climbing towards Fordingbridge and then up aptly named Godshill before another awesome descent into Cadnam, hitting 66kph before tucking in and hoping to stick the roundabout. It was on this descent that I learned a vital riding lesson:

Commit to the cattle grids!

When you approach six horizontal bars anchored into the pavement at 40 to 50 kph, the worst thing you could ever do is slam on the breaks or try and change directions. I have no idea if any cycling club would ever recommend this, but here is what I did: stood up with feet at 3 and 9 O’clock, hands on the hoods with arms bent and two fingers gently covering the brakes; with my knees bent I squeezed the saddle with my thighs and lined myself up to cross the grid panel head on and right in the middle. You want to stay away from the edge that get butted together, those look far too inviting for 23mm wheels. I hesitated between a bunny hop and just lightly lifting the pressure off the wheels. To be honest I was concentrating so hard on NOT letting any poo come out that I can’t remember which technique I actually used. The first grid scared me silly, especially since there was no warning that I was approaching it until it was far too late. By the time I had crossed my third grid, I was actually welcoming them. Now granted it was a very dry day and my tires and rock hard at 120psi, I’m not all sure this technique would work in the wet or in a curve (if you’re the guy zoning a cattle grid in a curve then f&$@ you). Also if you’re riding a MTB you are probably well versed in stupid road hazards, so your thoughts on this are welcome in the comments.

20130720-124030.jpg

The Pack Mentality, Re-Learning to Ride Safely

In light of this weekend’s tragic accident during BC’s Ride to Conquer Cancer where a young cyclist aged 16 lost his lost after clipping another rider’s wheel and falling into oncoming traffic. I think it’s important that we all remember and in some cases learn some of the basic rules for riding in a pack.

We share the road with cars who despite our numbers, loud jerseys, reflectors and lights will always claim they did not see us. Therefore it’s always a good rule to assume that you ARE invisible to them and try to ride in a way that is akin to the way motorcyclist call defensive driving, anticipate the road and the others around you. If you don’t make eye contact with the driver, then assume they have no clue you are on the road.

I stumbled upon this piece from the MEC Ride don’t Hide blog and had to share it. Please click on through and the read the great tips from Jess Hainstock and Allan Prazsky.

“Fluidity and subtlety are key whenever you’re in a pack, because an element of risk comes with group riding. Etiquette within the pack is important for several reasons, most notably safety for you and those around you,” Allan responds, when I explained the code of conduct I’d observed on the group ride. “There is something called ‘the accordion effect,’ where the action of the front rider gets magnified as you travel to the back of the group. A sudden acceleration, deceleration, or swerve becomes exaggerated as it moves through the pack, ultimately leading to frustration, a crash, or worst case, a frustrated crash.”

As my buddy Alister mentioned this morning when he forwarded the CBC news clipping: Safe Riding People

via Ride Don’t Hide – The Pack Mentality | MEC Blog.

Century Uno: The RTCC Training Continues

SafariScreenSnapz006It’s Victoria Day Bank Holiday in The Great White North and after a weekend of staining the deck and pergola, I just couldn’t take it anymore and had to get out on the Red Rocket. What started off as a simple Ile Perrot loop turned into my first metric century of the year. The wind was pretty forgiving and the carbon fibre K-Factor made all of the West Island roads feel pretty decent. Although I will admit that Ile Bizzard and Ile Perrot roads are pretty bad.

It felt pretty good to finally get a real 100KM ride in under my belt this year, especially after last week’s pretty abysmal commuting schedule. For some reason May always seems to just kick my ass, last year the weather and travel schedule didn’t help and year it’s been high winds and illness.

The Ride to Conquer Cancer is just over a month a way and if things keep going at this pace, I should be fine. It’s never too late to make a donation, just use the link above.  And if you’re keen on joining me in my training rides, just send me a note. I always welcome the company.

 

Please Support My Ride to Conquer Cancer

 

JohnnyintoMordor

I have started training pretty regularly for the Ride to Conquer Cancer coming up in July, Basically I will be riding from Montreal to Quebec City (about 300KM) over the course of 2 days in support of my friend Katrina who is battling stage 4 lung cancer. I will be riding with her husband Alister, her brother Greg, another of our friends Annie, a buddy from soccer Massimo and about 2000 other cyclists. It’s a pretty awesome journey and all in the aid of the Segal Cancer Centre at the Jewish General Hospital.

Red Rocket with new boots

Research has come a long way since I lost my grandfather Ben to lung cancer in 1991. When my sister Julie was diagnosed with Hodgkin’s in 2002 after giving birth to my nephew Mathieu, she was greatly aided by advanced detection and immediate chemo and radiation therapy. In her case, the research and excellent facilities made her journey through the treatment to be a more humane one. She has been in remission since 2008 and her own feisty spirit has driven her to keep fighting for her life, running half marathons and giving birth to her daughter Sophie and her son Ben.  

For Katrina there are treatments available that can significantly extend her life for several years with only minor side effects. She is in the minority for stage 4 lung cancer. Most people have only a short time. Although there is no cure, cancer research has given her the possibility of prognosis of years rather than months.

So I ask to donate generously by using the link below, I am about halfway towards my goal but the ultimate goal of kicking Cancer’s Ass for good is far close. I’m no doctor or research scientist but I am doing my part in raising awareness and getting fighting fit while doing it, now please do you part too.

Please Support My Ride to Conquer Cancer

Cold Morning Commutes

How a GPS Monitors a Fall

This morning on the ride in, I took a fall and hit the pavement pretty damn hard. Lucky for me the damage is mostly road rash, a few bruises and a battered ego as I blatantly ignored the “Glissant” sign right before the wet wooden bridge I was attempt to scream across. In all fairness it wasn’t the bridge that got me but rather the sudden contact with pavement that my wheels were obviously not prepared to grip into.  I’m sure I’ll be fine after a few days of healing. I’ll obviously have to repair the bike shorts, replace my gloves as well as my grip tape but at least the bike is in good shape and the wheels stayed true. Thank god for commuting on a bike with no fragile parts.

So after cleaning up and ingestion copious amounts of bold coffee, I zoomed in on the GPS data from the fall. I’m actually quite impressed at how quickly the Garmin adjusted to the sudden change in speed. The fall obviously lasted a few seconds at most, but what is interesting is how detailed the slide is and the sheer anger as I pulled the bike back up, gave it the once over as well as spraying water over my knee and moving on.

The rest of the ride was no fun at all but boy did I ever slow down for those damned metal bridges and the other wooden one by Peel Basin. As the leaves start to cover the path and the morning dew takes longer to evaporate I will have to readjust  my pace… again. I guess my summer of Strava segments might be over.

The French Fixie Conversion

Earlier this spring, I was over at my buddy Al’s house picking up some tools I need to finish  up a job at the house and he showed me a couple of old bikes he had hanging from the rafters of his shed. Both were road bikes equipped with some pretty casual looking handlebars, fenders and big old seats, but the one thing that really stuck out was the overall size of the frames and how light they both were. Especially this 1970’s era Peugeot Cadre Allegé, compared to my current mountain bike, this thing was about half the weight if not more. I asked him why he kept them both in the shed and he simply shrugged  his shoulders and asked if I wanted the bikes. Well I couldn’t pass up the chance to get my hands on such a classic bike, which let’s face it was about as old as me. He also gave a big box of parts that had been swapped out for the casual stuff you see in the picture above.

Once I got it back to my workbench, I knew immediately that there was no way this thing was ever going to be ridden in it’s current state and rebuilding it with today’s parts was going to be a very expensive and laborious task. However the frame, even if a little scuffed was in very good shape and like I said before incredibly light. From everything I have read so far, these earlier bikes were made from some pretty good quality steel which makes them very strong, very light and very forgiving on our Montreal roads and cycle paths. So after speaking my riding buddy John and Fab, a colleague at work, I decided to do the only logical thing and build myself a fixed gear bike.

The oldest and simplest type of bicycle is the “fixed-gear” bicycle. This is a single-speed bike without a freewheel: that is, whenever the bike is in motion, the pedals will go around. You cannot coast on a fixed-gear machine.

— from SheldonBrown.com

OK, I’ll admit that it does sound a little crazy to ride a bike a that you can never coast with. Yet these are the same kind of single speed fixed geared drive trains that they ride on tracks and velodromes, you get the most amount of control over the bike, your cadence sets the speed and the deceleration. Also since there are no derailers, extra sprockets and sometimes no rear brake, these bikes are very low maintenance and ideal for commuting and flat land rides. Anyway, if you want to know more about Fixed-Gear bikes you really need to take a look at Sheldon Brown’s site.

So once my mind was made up, I set about talking the bike apart and seeing what I could Peugeot Stem Badgere-use. The 27 inch front wheel was in pretty good shape, nice and straight, the rear wheel was a little warped but the cassette appeared to be fixed on. Both tires and tubes were completely worn out. In fact all of the cabling was also fragged. And the original white flex tubing has been seriously yellowed with time, Thankfully I was ripping all that stuff out. I had considered scrubbing down the frame and repainting it, but the decals and badges are so cool, I just couldn’t do it. In it’s current state, it might actually act as a theft deterrent too. This actually turned out to be a blessing as it was the only sure way to identify the bike as being French built and not a Canadian build. The “O” is what give it away, or so I’m told.

Unfortunately, the pedal arms and crankset were welded together and there was no way to  remove one the cranks. Also the bottom bracket had cotter pin type fittings so that meant I would be stuck with 40-year-old pedal arms forever. The chain was also useless since it was made for a derailer and would never fit on a single speed crankset. So in order to make this work I would need some new parts for this old foreign bike.

  • One Ole-Skool French Bottom Bracket
  • One 46 tooth Crankset with 170mm pedal arms
  • One 16 tooth Shimano fixed gear
  • One Lock Ring
  • One 27inch or 700c Flip-Flop wheel (More on flip flop wheels from SheldonBrown)
  • 2 New inner-tubes and high pressure road tires

So basically, the entire drive-train.

Piece of cake right? Well not really. In fact the 27 inch rear wheel would have been quite expensive to order from Harris Cyclery as the delivery and duty costs alone would have added far too much to the total cost of the order. So I decided to try to source everything locally in The Great White North. This meant settling for a 700C rear wheel which actually fits really well on the bike with only minimal brake adjustments. And, yes I am putting a rear brake on this bike, riding in Montreal is hilly and dangerous enough that TWO brakes are usually a good idea. After scouring the net for while and always ending up on BC sites for small shops that want you “come in with your frame”, I discovered a small shop downtown called Bikurious.  An unfortunate name considering where it’s located in Montreal but a truly fantastic shop with some of the most knowledgeable and honest staff I have met in a very long time. They are the ones that immediately recognized the Peugeot as being an earlier French built model and not a Canadian built version from later in the 70’s. They were also honest enough to let me know that if I did take on this fixie conversion, it would end up costing me more than if I had picked up an old Raleigh or CCM bike. But since was the tallest frame I could find, I decided to go ahead with it. They also suggested I get a AlexRim 700C wheel, rather than build my own or attempt to rebuild the 27 inch. The wheel is not only pretty cool but very solid and light with more than enough spokes to support my 6’4″ frame. I also picked up the bottom bracket and crank-set from there as well. They took the time to review my gear choice and after explaining my usual route and objective of 5000KM agreed that 46/16 crank/cog set would be fine. John had already given me the 16 (Shimano Dura-Ace of course), so all I needed was a lock ring and a 46 tooth crank-set with 170mm arms to fit on a “Old French” style bracket. The odd thing about the bottom bracket is that:
A) It’s about twice the price of a standard American bracket.
B) It has a double clockwise thread, so it’s very easy to mount it backwards. Which I did of course.

The drive train was actually pretty easy to assemble since there really isn’t anything complicated about fixed gear bike. Simply get the bottom bracket and crank-set on properly, install the rear wheel and then careful fit the chain making sure to align the cog and crank for minimal rubbing or torsion and then use a chain fitting tool or a quick release chain ring to secure the chain. Be very careful of your fingers when you do this, remember that if the wheel is turning, that chain is moving and that one gears will grind whatever gets in the way. Because the crank is a proper fixed gear crank and not one converted from a road bike, I also had to make to get a 1/8th chain. I picked up a heavy-duty chain similar to a BMX chain at the local shop to handle the extra pressure of my large frame and the grind of my long levers on Montee Peel. At this point the bike really started to look right, once that drive train is on all you need is some brakes to stop it before you can take it for a test ride. Some hard-core fixie riders will boast the merits of brake-less stopping and skidding but that’s just not for me.

I swapped out the original spring-loaded seat (seen up top) with a slightly more rigid leather Schwinn seat I had lying around (pictured above). The seat post was still too short, but having a 23.4mm down-tube meant it wasn’t an easy item to replace. That’s when I discovered that BMX chromolly seats are usually 22mm and extra long so with an extra shim I could potentially use with my road seat, beware that is has to be chromolly for extra rigidity and to endure the stress of a heavier rider. After a few weeks riding I also swapped out the 38cm handle bars as the original stock bars where rather narrow and I could feel my chest tightening after an hour of riding. I picked up some 44cm drop bars from MEC at a nice price of $24 and added some black cork grip tape and the suddenly I had a real commuter to haul my back side up and down the windy Lachine Canal every day for the next 4000KM

I started building the Peugeot Fixie in late June and managed to get in on the road for July which turned out to be a relatively dry month. The whole reason I built the bike was to make my time in the wind a little easier. However it turned out this bike is such a joy to ride, that I ended up taking it out for errands, extended rides home and even on longer weekends rides too, the tune pf 940KM.  I guess I’ve always loved the speed of road bikes as I did own two “sweet rides” as a younger man, but living in various rural areas over the years as well as cycling with the kids got me into mountain bikes. But let’s all be honest, there is nothing more fun than the sound of thin tires whizzing along a nicely paved road, but the real thrill is taking a fixed gear bike over a nice path and can be a real joy to ride. This might sound a little like Sheldon Brown, but I honestly think I have become a better rider from putting in my time on this Peugeot. My cadence is stronger and more consistent, my turns are better paced and my overall control of the bike just seems more intuitive and natural especially compared to trying to fumble with 28 gears before a stop light. And yes I still use my brakes even if they sounds like a screaming eagle, I’m not an idiot after all. The overall maintenance has been minimal, I’ve had to change one tire due to some bad road conditions and apart from keeping the chain lubed, I’ve only had to pull the rear wheel back once and only after a particularly fast descent on a 116KM weekend ride. Building it was a fun and taught me a lot more about bikes, but riding has been a real blast and has really taught me a lot about cycling.

The First 1000KM

Just over a week ago I hit my first 1000KM on my away to 5000KM by the end of October this year. Come to think of it, this might very well be my first thousand kilometers  I have  rode on my bike ever, at least intentionally. It could very well be that when I hit 1K mark a few summers when I was much younger. But for this sake of this post and to avoid a crazy amount of time on Google Maps, we’ll just have to say this is the first time in over ten years.

So how did it go?

Not too bad actually. I had a slower start than I would have wanted, some bad weather and a trip to L.A. slowed things down a bit in May. But June was spectacular and I managed to rack up 670 KM without too many incidents. The RidgeBack MTB I have been riding is over 17 years old and still has most of it’s original parts. For example the wheels are original and even though I have changed the tires, the aluminum had started to oxidize and even the spokes were getting a little corroded. On one ride home in May, I hit a pothole, heard a pop and wondered why the back-end started to wobble quite a bit. Turns out, 2 of the spokes had popped and another 6 where soon to go too. By the time I made it Fraser’s in Valois, the wheel looked like something out of a cartoon and when Harry the Techie grabbed the wheel, only the hub was still attached to the bike. Once the wheel was replaced, I magically found an extra 4KM/h do to the fact that brake was no longer rubbing the rim every quarter revolution. So apart from the braking effect and my inability to ever be in the right gear, the biggest drag to my improvement has literally been drag. Sitting up right on a mountain bike and riding against the prevailing wind for 25KM does very little improve your time.

Generally speaking the riding has been good, I have started commuting with John again and he’s proven to be a pretty good motivator. There is nothing worse than getting your ass kicked by a guy riding a 30-year-old bike he picked up for $10 and then proceeded to equip it with parts salvaged from the dead bikes found in the trash.  He’s been riding this fixed gear home-built special for a few years and it gave me the idea to try to rebuild an old Peugeot Cadre Allegé road bike that had been hanging from the rafters in my buddy Al’s shed for the last few years. It needed far too much work to get it working in its current  state or to rebuild with current parts. So a “Fixie Conversion” was the only logical thing to do. But I will leave the details for the next post.